How To Fix An Office Chair That Leans Back

Office chairs are used for the whole day. As you spend around 6 to 8 hours a day on your chair, it will affect your physical health. So, the chair you are using must be very comfortable for you. We will guide you on how to fix an office chair that leans back.

Sometimes chairs you are using for the last few years or even the new ones may not function properly. One common problem is when the chair starts tilting backside which is not supposed to. And this backward or sideways leaning of the chair may destroy all your comfort. And even, a one-side leaning chair can severely damage your back.

So, it is better to know how you can fix this tilting problem in your chair and you can always fix it as soon as possible. As, it may be not possible that every time you can buy a new chair, as it will cost a lot for you.

We have done a little research about it and found some most common reasons for this, and in this article, further, we will read how to fix these issues of chairs. I had also included some tips to maintain your office chair.

This problem of an office chair may occur because of broken or damaged casters, a little change in the chair's tilt tension and it can be due to a loose or bent seat plate. We can fix these issues by replacing damaged casters, adjusting the tilt tension, or tightening the seat plate.

Let's read it further and learn how to troubleshoot and fix this issue.

• Sometimes the casters may be damaged or break over time which is causing the tilting of the chair from right or left and makes it a leaning chair. So, flip the chair upside down and compare the wheel of each leg and find out which one is bent or defective or which is not touching the floor. If you found even a single then replace these damaged casters with the new ones. And also checks if any screw is pooped out. So that it will continue to function properly.
  Once sit on it and make yourself comfortable. And also make sure that it is not leaning to the back.

Once sit on it and make yourself comfortable. And also make sure that it is not leaning to the back.

• Sometimes it only needs the adjustment of the tilt tension, as it can loosen over time. So now, sit on the chair and determine how far back the chair is going.

Next, keep sitting on the chair, and start releasing or tightening the tension knob for more tension (if the knob is not there then there should be a lever present underneath the chair). And when you reach your desired tilt level leave that knob. Once check if you had reached your desired tilt level or not by leaning back. And if you have not then repeat the same to tilt the chair forward until you do.

• Sometimes the seat plate can also lose its original adjustment and may bend or loosen up.

If this is happening with your chair then inspect the seat black plate. You can find it beneath the cushion of the chair. And find if there is any loose or missing screw (note down their sizes) and bolt, tighten up or replace them as needed. And also adjust the height of your office chair according to the way you want. So, here are the steps to help you shortly and which you may follow to fix the problem.

1. Open every part of your chair.
2. Realign arms and back of the chair.
   
3. Reinstall the wheels and even you may replace the old ones with the new ones.
   
4. Place everything together and find if anything is missing, screws or bolts.
   
5. Tighten all the screws.
   
6. Reinstall the black plate under the seat of your chair.
   
7. And finally, check if it is working or not.
   

Even after doing all this, if you still do not understand the problem or you know you are right at each step, still it is not working then it is better to take your furniture to the expert.

Indeed, it will be your money-saving as well as your time-saving decision. Because the total cost for fixing your chair will surely be less than buying a new one. Fixing your leaning chair is not a very difficult job as it seems but sometimes it is quite tricky.

So, all you have to do is check your chair thoroughly and tighten the screws, bolts, black plates, and casters to give a fresh start to your chair. And in this manner, you are not only saving your money but also you are protecting your back from getting sick.

And everyone knows that healthy living is a key to success. And any other element in this universe dares to replace the happiness of having a healthy soul and mind for you. Like I told you I'll add some tips so, here are they:

Tips To Maintain Your Office Chair

Like other furniture of the house, you can also clean these office chairs regularly to avoid damages. So, here are a few habits you may adopt in your daily life to maintain your office chair:

1. Inspect The Casters

It doesn't matter whether your office has a hardwood floor or carpeting, the wheels should continuously roll across everything. So, to keep this smooth rolling, pull out all debris inside the casters.

2. Tighten All The Fasteners

As you know, it contains many screws and bolts. So, keep inspecting it nearly every six6-month and tighten it if there are any loose screws or bolts. Turn the chair over so the legs are upright and the seat is toward the floor and examine the seat plate.

3. Apply Conditioner To Leather Chairs

If you are using a chair made of suede or leather, then try to maintain a humidity level of at least 40%. And it’s even better to apply a conditioner to it after every few months.

4. Keep Away From Direct Sunlight

These chairs are usually made of leather or suede. So, you should keep them away from the direct sunlight, as it can degrade the chair’s cover.

Here also look for Best office chair under $300.